Rare Gas Purifier .
Rare Gas Purifier
The
Rare Gas Purifier, has been developed from a family of rare gas
purifiers originally designed by BOC. For normal flow rates of 10
litres/minute that will reduce the impurities (typically 30 vpm) of
commercial rare gases (argon, helium, krypton, neon, and xenon) down to a
level of less than 1 vpm in total. Depending on flow rate the RGP-4 in
normal use is on average capable of continuous operation for in excess
of two years before it becomes necessary to replace the reagent tubes.
The Rare Gas Purifier is of a standard size (19”) suitable for rack or bench mounting, and specifically made for laboratory or process work.
Features
- Excellent purification of commercial grade rare gases, impurities reduced to less than 1 vpm
- Simple to operate, low cost, fully automatic, factory pre-set system
- Rapid warm-up time
- Lightweight, robust, compact, 19” rack mounting
- Unaffected by ambient temperature variations
- Long life reagent tubes
Specification
- Impurities removed: Oxygen, Nitrogen, Hydrogen, Hydrocarbons, Moisture, CO, CO2
- Power requirements: 210 to 250V AC 1100 W or 100 to 130V AC 1100 W
- Gas connections: ¼” outside diameter “Swagelok Quick Connect” couplings
- Pressure requirements: 450 mbar to 17 bar
- Maximum recommended flow rate: 10 litres per minute
- Minimum recommended flow rate: 25 millilitres per minute
- Furnace temperature: 675 to 725ºC
- Outlet gas purity: Less than 1 volume per million impurities
- Cabinet dimensions: Suitable for 19” rack or bench mounting 490 × 230 × 400mm
- Weight: 14