Home / Our Products / Civil Engineering Lab Equipments / Wind Tunnel / Fan Test Stand

Fan Test Stand

Fan Test Stand .

Description of Fan Test Stand:

The bench consists of a welded steel frame mounted on castors providing two work surfaces for experiments together with ample storage space for experimental apparatus when not in use. The working surfaces accommodate a control console and a centrifugal fan with variable speed dynamometer drive, to which can be coupled a series of inlet and outlet ducts. The ductwork supplied with the bench is manufactured in aluminium sections assembled by deep spigoted sockets, sealed by ‘O’ rings. It includes a venturi nozzle, a bell mouthed inlet, flow straighteners, pressure tapping points and disc valves and is designed to allow assembly to various configurations by means of quick release toggle latches. The centrifugal fan which has a low chord impeller and split volute diffuser casing is directly driven by a DC dynamometer giving a variable speed from 0-4000 rpm, with a swinging stator providing load cell torque measurement and equipped with a toothed wheel for speed measurement (see Fig. 1 for performance data). The control console houses all electrical components and circuitry associated with the power and speed control, while the instrument panel includes: START/STOP pushbuttons, speed control knob and torque, speed, armature voltage and current displays. A dual multi-slope manometer scaled 0- 5 and 0-2.5 kPa is supplied for use with the air flow nozzle.

Experimental Capability of Fan Test Stand:

Air flow rate measurement as a function of fan speed
Static pressure measurement and its variation with air flow rate
Dynamic and total pressure measurement
Measurement of electrical power required by fan
Fan motor torque
Fan efficiency at different speeds
Flow measurement by pitot static tube traverse and by flow nozzle
Measurement of temperature rise across fan

Specification of Fan Test Stand:

Apparatus consists of trolley unit with control console, centrifugal fan with low chord impeller driven by variable speed 0-4000 rpm DC dynamometer with swinging stator providing load cell torque measurement and toothed wheel for speed measurement; quick release toggle assembled ductwork comprising 60º conical inlet 95 mm dia. with four static tapping., 95/145 mm dia. divergence section, 145 mm dia. 400 mm long section with flow straightener and pitot static tube provision and four static tappings, 145 mm dia. 300 mm long exit flow straightener, 145 mm dia. 350 mm long section with four static tappings, an inlet/outlet valve assembly, a 145 mm dia. bell mouthed inlet, a 145 mm dia. 1m long section with four static tapping., a 145 mm dia. nozzle inlet with twelve static tappings, a venturi nozzle assembly, a 95 mm dia. pitot traverse section, a valve adaptor ring and disc valves; adjustable angle manometers scaled 0-5 and 0-2.5 kPa, air flow nozzle pitot static tube with 40-0-40 mm scale, armature voltage meter 0-250V, ammeter 0-10A, speed 0-100%, torque 0-100%, speed control potentiometer, START/STOP pushbuttons and earth leakage circuit breaker

Related Training Products from Indian Manufacturers Suppliers Exporters ...

Tender Related Teaching Lab Products, Scientific Instruments and Educational Equipments like Fan Test Stand buy and order from Manufacturers in India

Two Dimensional Wind Tunnel

Two Component Balance

Boundary Layer Experiment

Smoke Generator

Turbulent Jet

Fan Test Stand

Subsonic Open Circuit Wind Tunnel

Supersonic Wind Tunnel