Computer Control Electronic Pendulum Impact Testing Machine .
Computer Control Electronic Pendulum Impact Testing Machine Under Dynamic Loads
Features of Computer Control Electronic Pendulum Impact Testing Machine Under Dynamic Loads
Technical Specifications:
Capacity
450 J |
|
Pendulum moment |
241.1543 N.m |
Angle resolution |
0.1 |
Angle of striking |
1500 |
Distance between pendulum rotating center and specimen center |
750 mm |
Velocity of striking |
5.2 m/s |
Support span |
40mm |
Radius of curvature of supports |
2.5mm |
Angle of slope of supports |
0° |
Angle of taper of supports |
11°±1° |
Radius of striking edge |
2-2.5mm |
Angle of striking tip |
30° |
Thickness of striking |
16 mm |
Specimen dimension (Length x width x height) |
55×10×10mm, 55×10×7.5mm, 55×10×5mm |
Dimension (length x width x height) |
1950×575×1460mm |
Dissplay |
touch screen |
Weight |
600 kg |
Power consumption |
800W |
Power requirements |
3-phase, 5-line, AC 380V±10% 50Hz |