C Type Steel Body Inclinable Presses

C Type Steel Body Inclinable Presses .

Standard Accessories : Suitable Electric Motor 3 Phase Motor Pulley Suitable Push Button Starter Set of V-Belts Belt Guard Gear Guard Hand safety device Special Steel Spanner for adjustment to lock Nutt Hand operated oil lubrication Pump Clamps for Holding dies Bolster Plate duly machined having T-Slots

SPECIFICATIONS INCLINABLE POWER PRESSES - Series (Steel Body)
Maximum Pressure     10 Tons     20
Tons     30 Tons     50
Tons     75 Tons     100 Tons     150 Tons     200
Tons     250
Tons
Stroke     50
MM     62
MM     75 MM     87
MM     100 MM     112 MM     150 MM     188
MM     226
MM
Length of Bed     483     550     660     779     813     940     1016     1092     1168
Width of Bed     330     362     406     508     546     686     737     788     839
Opening in Bed     114     114     127     152     178     216     254     292     330
Bolster Plate Thiness     64     65     76     76     89     102     102     102     102
Bed to Ram bottom     235     275     330     432     470     597     635     673     711
Hole in ram for Punch - Dia     38     38     51     51     51     79     79     79     79
Hole in ram for Punch Depth     70     70     79     89     89     -     152     152     152
Adjustment ram     19     19     25     32     32     32     32     32     32
Fly Wheal Dia     508     550     610     787     914     965     1066     1167     1268
Gear Dia     425     500     650     700     800     900     1066     1162     1263
Section of V Belts     B     B     B     B     B     C     C     C     C
No. of V Belts     3     3     3     3     4     4     4     5     5
Mo. of Strokes per - minute     76     70     60     55     40     35     30     30     30
Electric Motor (1440 RPM )     2 HP     3 HP     3 HP     5 HP     7.5 HP     10 HP     15 HP     20 HP     25 HP
Gross Weight     900 Kgs.     1300 Kgs.     1900 Kgs.     3300 Kgs.     4500 Kgs.     6000 Kgs.     8000 Kgs.     10000 Kgs.     13000
Kgs.
 
SPECIFICATIONS STEEL BODY POWER PRESS - Geared & Ungeared Inclinable Or Fixed Body Series
Capacity     3 Tons     5 Tons     10 Tons     15 Tons     20 Tons     30 Tons     50 Tons     75 Tons     100 Tons     150 Tons     200 Tons     250 Tons
Crank Shaft Dia.     38     51     60     70     76     83     95     115     127     140     158     165
Stroke Adjustment     2-19     6-25     6-25     10-38     13-51     13-63     13-76     13-102     13-15     13-127     13-152     13-165
Side Adjustment     20     25     25     25     25     25     40     50     60     60     70     70
Hole in Ram     19     25     25     32     32     38     51     51     55     55     63     63
Hole in Bed     51     63     76     89     89     102     127     178     191     23     216     216
Length & Width of Bed     255 x 152     305 x 178     356 x 203     432 x 254     457 x 305     508 x 355     660 x 406     711 x 508     813 x 558     914 x 610     965 x 660     1067 x 711
Dist. Bed to Ram /     152     152     180     205     230     266     290     330     381     410     432     485
Stroke Per Minute                                                                        
Geared (S.P.M.) I     90     80     80     75     60     55     5     50     45     40     30     30
Ungeared (S.P.M.) II     165     150     130     120     120     115     90     -     -     -     -     -
H.P./Rpm Ungeared     0.5 / 960     0.5 / 960     1 / 960     1.5 / 960     2 / 960     3 / 960     5 / 960     -     -     -     -     -
H.P./Rpm Geared     0.5 / 1440     0.5 / 1440     1 / 1440     1.5 / 1440     2 / 1440     3 / 1440     5 / 1440     7.5 / 1440     10 / 1440     15 / 1440     20 / 1440     25 / 1440
Floor to Top of Bed     520     690     730     740     815     815     900     915     915     915     1000     1050
Weight Approx. Kg.     200     300     450     700     900     1100     2350     3500     5000     6000     9000     11500
 
Shut Height at standard Max. Stroke is the distance between table surface & slide face with slide at bottom of stroke & adjustment up.
 
PILLAR TYPE POWER PRESSES
 

TWO POINT STEEL BODY, HIGH SPEED UNGEARED WITH PNEUMATIC CLUTCH ELECTRICALS AND ITS FITTINGS OR ROLLING KEY CLUTCH

SPECIAL FEATURES :

    The Pillar Type presses are made through welded steel construction for utmost rigidity and low deflection.
    Fabricated steel slide running in eight extra long guides with non-metallic liners to ensure perfect alignment.
    Slide counter balancers to minimize guide wear and ensure smooth movement resulting in improved tool life.
    Combination clutch and brake with interlocking of functions and dual solenoidvalve to ensure" fail safe" operation.
    Efficient DC variable speed drive for quick and wide selection of speeds.
    Motorised central lubrication system.
    Stroke counter, slide adjustment indicator provided on machine.
    Motorised slide adjustment.

SPECIFICATIONS FOR INCLINABLE POWER PRESSES - AMI-H Series (Steel Body)
Maximum Pressure     50 Tons     80 Tons     100 Tons     160 Tons     200 Tons
Bolster Area LR.-F.B.     700 X 500     750 X 550     1000 X 600     1050 X 600     1100 X 600
Stroke Fixed     40     40     45     45     45
Bed to Ram Bottom     300     300     300     350     350
Slide Area L.R.-F.B.     500 X 400     550 X 400     900 X 500     900 X 500     1000 X 500
Strokes Per Minute     90     90     80     80     80
Section of V Belts     B     B     B     C     C
No of V Belts     3     3     3     4     4
Main Motor (960 RPM)     3HP     5HP     10HP     15HP     20HP
Also available in variable speed motors.
 
CROSS SHAFT POWER PRESSES
 

STEEL BODY WITH PNEUMATIC CLUTCH, ELECTRICALS AND ITS FITTINGS

SPECIAL FEATURES :

    The front-to back shaft gap frame press has been developed for the general stamping and forging industry which require very high rigid presses.
    Heavy ribbing welded to the frame insures optimum rigidity into he longitudinal (left- to-right) direction of the press. Further, the main shaft is supported at three bearing points to eliminate cantilever action. The closeness of the bearings to each other also imparts sturdiness to the shaft.
    Combination type of friction clutch & brake unit eliminates overlapping of torque, gives fast action and reduces lining wear to the minimum.
    All the drive components are housed which in the frame structure itself to ensure better excess to the working area and geater operational safety.

SPECIFICATIONS FOR INCLINABLE POWER PRESSES - AMI-H Series (Steel Body)
Maximum Pressure     25 Tons     40 Tons     63 Tons     80 Tons     110 Tons     160 Tons     250 Tons
Bolster Area L.R. - F.B.     640 x 380     750 x 460     800 x 500     850 x 550     1100 x 700     1250 x 800     1350 x 900
Stroke Adjustable     75     75     87     100     125     150     150
Slide Adjustment     50     50     50     50     70     70     70
Bed to Ram Bottom     300     350     375     425     600     800     900
Hole in Bed     130     150     170     190     212     250     300
Shank Hole     50     50     50     50     80     T SLOT     T SLOT
Stroke Per Minute     60     55     50     40     35     35     30
Section of V-Belts     B     B     B     B     B     C     C
Main Motor (1440 RPM)     3 HP     3 HP     5 HP     7.5 HP     1O HP     15 HP     20 HP