Magnetic Particle Brake 50/60 HZ

Magnetic Particle Brake 50/60 HZ .

Magnetic Particle Brake 50/60 HZ

Mounted on the test bench, the magnetic particle brake can be coupled within seconds to any 1/3hp rotary machines to establish the load of a machine. It is equipped with a magnetic particle brake in which the stator is assembled with a balance arm and a load cell system, as well a rotor driven by the tested machine. The load torque is directly proportional to the control voltage and fully independent from the rotor rotation speed. In internal mode, the magnetic particle brake is controlled with a potentiometer and its load torque measurements can be read in the analog meter display. In external mode, the unit can also be operated with 0-5V DC external drives or by computer and dedicated software. For ease of identification and use, the specifications and schematic diagrams are silk-screened on the reverse of the clear front panel. Requires a 120V 60Hz or 220V 50Hz circuit.

Main Features of Magnetic Particle Brake 50/60 HZ

• Stable shockless braking torque
• Rated torque available from zero speed
• Operation in either rotational direction
• Braking torque measurement included

Technical Specifications of Magnetic Particle Brake 50/60 HZ

• Power: 120 VAC, 60 Hz or 220 VAC, 50 Hz
• Rated load torque: 1.33 N.m/1.0 lb.ft
• Max. load torque: 3.40 N.m/2.5 lb.ft
• Max. speed: 4000 rpm
• Software interface included
• Operation in either rotational direction
• Automatic offset adjustment