Experimental Module Rolling Sliding Disc

Experimental Module Rolling Sliding Disc .
Experimental Module Rolling Sliding Disc      

Technical Description of Experimental Module Rolling Sliding Disc

The slip forces between two rotating friction discs in contact can be determined using this accessory module. The unit is intended for operation with the basic module. Connection to the basic module is made using a clamped coupling. The slip between the discs is maintained at a constant 4% by a gearbox. The contact pressure can be adjusted in steps (10N) up to max. 80N.This adjustment is performed using a lever with a mechanical advantage of 2:1. A strain gauge force transducer connected to the controller measures the friction forces directly. The unit has a container for supplying lubricant. Knurled bolts enable the friction discs to be changed easily.

Specification of Experimental Module Rolling Sliding Disc

    Supplementary experiment on slip forces between two rotating discs in contact
    Friction discs 53mm diameter, materials: aluminium/rubber
    Gearbox ratio i: 0.96
    Strain gauge transducers for friction force 0...50N
    Weight set up to 40N
    l x w x h 490x280x150mm
Technical Data of Experimental Module Rolling Sliding Disc

Friction discs
    Diameter: 53mm
    Materials: aluminium/rubber
    Gearbox ratio: i = 0.96
    Strain gauge transducers for friction force: 0...50N
    Weight set up: to 40N
 
Dimensions and Weight of Experimental Module Rolling Sliding Disc
    l x w x h: 490 x 280 x 150 mm
    Weight: approx. 10 kg