Double Effect Falling Film Evaporation Plant

Double Effect Falling Film Evaporation Plant .

• Metering pump with a flow rate of 0 to 32 litres per hour and pneumatic actuator
• Feed tank with a capacity of 25 litres
• Tank with a capacity of 10 litres for collecting the concentrated product
• Tank with a capacity of 10 litres for collecting the condensed solvent
• 2x Steam traps
• 2x Graduated tanks with a capacity of 1 litre for measuring the condensate
• Bourdon pressure gauge with a capacity of 0 to 6 bar
• Bourdon pressure gauge with a capacity of 0 to 1.6 bar
• Bourdon vacuum gauge with a capacity of 1 to 0
• Metering pump with flow rate of 0 to 8.5 litres per hour
• 2x Falling film shell-and-tube evaporators, each with an exchange surface of 0.27 m²
• Shell-and-tube condenser with an exchange surface of 1.1 m²
• Tube-in-tube heat exchanger
• Level transmitter, capacitance type with electronic display
• Pneumatic valve for control of the steam flow rate, Cv=0.32
• Calibrated diaphragm with differential pressure transmitter for measuring the steam flow rate
• 12x digital thermocouples with pt100 probes protected by stainless steel shield sleeves
• 12x electronic temperature indicators
• Flow meter with a range of 25 to 250 litres per hour
• Liquid ring vacuum pump of power 0.7 kW equipped with air/water separator and solenoid valve for feed water
• Pipework manufactured from stainless steel
• Electrical control panel in main cabinet
• Emergency stop button

Size:-

• Manual Double-Effect Falling Film Evaporation Pilot Plant                                     DICE041/1
• Manual Double-Effect Falling Film Evaporation Pilot Plant with Data Acquisition  DICE041/2
• Automated Double-Effect Falling Film Evaporation Pilot Plant