Deflection of Frame

Deflection of Frame .

Description of Deflection of Frame

A 'rectangular' Portal frame and an 'S' frame made from rectangular solid steel section are provided with a range of fixed or pinned ends and simple supports to enable each frame to be set up in the Universal Frame and Stand and loaded horizontally and vertically. One end of the portal frame pivots on a knife edge, while the other end is free to move horizontally on a track plate against a load cell.

Horizontal reactions are monitored using the integral load cell within the track plate and its output fed into the Interface Deflection of Frame and sway is measured using the dial gauges supplied. Load hangers, calibrated weights, cords and pulleys are provided to apply vertical and/or horizontal loading to the frames.

Experimental Capabilities of Deflection of Frame

1. Comparison of experimental results with theoretical values derived using Castigliano's theorem and numerical analysis by Simpson's rule
2. Study the load, horizontal reactions, deflections, sway in portal frames

Specification of Deflection of Frame

1. Two test frames supplied as standard
2. Vertical and horizontal deflection measurement
3. Uses Castigliano's theorem with numerical analysis by Simpson's rule
4. Study of load, horizontal reactions, sway
5. A variety of end conditions provided
6. Load cells and dial gauges supplied
7. Support reactions, horizontal forces, and portal sway (deflection) must be captured on Interface Text book and accessories included
8. Set of weights included
9. Must be used with universal Frame and Stand
10. Must be used with Interface
11. Comprehensive instruction manual provided